General Purpose License Plate Mount Designs
These are available as a motorized, free-spinning or fixed design.

They mount using a special frame that mounts behind the license plate.

Power for the motor can be supplied from a number of sources. Installation of these may require some customer ingenuity.

It is recommended that you drill the lower two license plate mounting holes if they are not already present.

Requires at least 2 inches of flat space near the top of the license plate on either side.

If you do not have at least 2 inches of flat surface on either side you can use the offset version which provides a special frame to mount the license plate 1 inch offset. To use the offset version requires at least 1 inch of flat space on BOTH sides of the license plate.